|
回覆: 方向好线
引用:
最初由 fugoal 發表
http://bbs.macd.cn/viewthread.php?t...&extra=page%3D1
方向好线
DRAWICON(((CLOSE > 0) AND (ISLASTBAR = 1)),CLOSE,'1'),ALIGN4,SHIFT2;
STICKLINE((CLOSE >= OPEN),CLOSE,OPEN,8,1),color43FF;
STICKLINE((CLOSE >= OPEN),CLOSE,HIGH,0.5,0),color43FF;
STICKLINE((CLOSE >= OPEN),OPEN,LOW,0.5,0),color43FF;
STICKLINE((CLOSE < OPEN),CLOSE,OPEN,8,0),colorFFFF00;
STICKLINE((CLOSE < OPEN),HIGH,LOW,0.5,0),colorFFFF00;
VAR15:=IF(((((CLOSE / REF(CLOSE,1)) > 1.05) AND (((VOL / CAPITAL) * 100) < 10)) AND ((HIGH / CLOSE) < 1.01)),1,0);
STICKLINE((VAR15 = 1),(LOW * 0.99),(LOW * 0.94),6,1),LINETHICK2,colorFFFFFF;
DRAWTEXT((VAR15 = 1),(LOW * 0.94),'追漲66%'),colorFFFF00;
D01:((EMA(CLOSE,3) - EMA(CLOSE,6)) * 5),LINETHICK0;
千金線:(EMA(D01,7) + EMA(CLOSE,5)),colorFF;
PARTLINE((千金線 > REF(千金線,1)),千金線),LINETHICK2,colorFF;
PARTLINE((千金線 < REF(千金線,1)),千金線),LINETHICK2,colorCCFFFF;
VAR1:=(EMA(VOL,12) - EMA(VOL,26));
VAR2:=EMA(VAR1,9);
VAR3:=(((EMA(CLOSE,30) * 2) + MA(CLOSE,60)) / 3);
VAR4:=(VOL * CLOSE);
VAR5:=(EMA(VAR4,13) / EMA(VOL,13));
VAR6:=(EMA(VAR4,60) / EMA(VOL,60));
VAR7:=EMA(((VAR5 + VAR6) / 2),3);
中線:MA(((VAR3 + VAR7) / 2),1),LINETHICK0,colorFFFF;
DRAWICON((中線 < REF(中線,1)),中線,7),LINETHICK2,colorFFFFFF;
DRAWICON((中線 >= REF(中線,1)),中線,6),LINETHICK2,colorFF;
VAR11:=((2 * CLOSE + OPEN+ HIGH+ LOW) / 5);
VAR12:=VOL;
短線:=SUM((VAR11 * VAR12),13) / SUM(VAR12,13)),colorFF00FF;
PARTLINE((短線< REF(短線,1)),短線),colorFFC8FF;
AM:=DMA(MA(DMA(CLOSE,VAR2),6),(VOL / SUM(VOL,89)));
分水線:AM,LINETHICK2,colorcc66cc;
追漲:IF((VAR15 = 1),50,0),LINETHICK0,colorFFFFFF;
VARA:=IF((CLOSE > 150),91.3,0.913);
【下沿】:=(INTPART((CLOSE / VARA)) * VARA);
【上沿】:=(【下沿】 + VARA);
【中線】:=((【下沿】 + 【上沿】) / 2);
STICKLINE(((((SYSPARAM(1) = BARPOS) AND 【下沿】) AND (CLOSE > 【下沿】)) AND (CLOSE < 【中線】)),【下沿】,【下沿】,50,0),LINETHICK3,colorFF9900;
STICKLINE(((((SYSPARAM(1) = BARPOS) AND 【上沿】) AND (CLOSE < 【上沿】)) AND (CLOSE > 【中線】)),【上沿】,【上沿】,50,0),LINETHICK3,color99FF;
STICKLINE(((SYSPARAM(1) = BARPOS) AND 【中線】),【中線】,【中線】,50,0),LINETHICK3,colorFFFFFF;
DRAWTEXT(((((SYSPARAM(1) = BARPOS) AND 【下沿】) AND (CLOSE > 【下沿】)) AND (CLOSE < 【中線】)),【下沿】,'支撐'),SHIFT3,colorFF00;
DRAWTEXT(((((SYSPARAM(1) = BARPOS) AND 【下沿】) AND (CLOSE > 【下沿】)) AND (CLOSE < 【中線】)),【中線】,'壓力'),SHIFT3,colorFF;
DRAWTEXT(((((SYSPARAM(1) = BARPOS) AND 【上沿】) AND (CLOSE < 【上沿】)) AND (CLOSE > 【中線】)),【上沿】,'壓力'),SHIFT3,colorFF;
DRAWTEXT(((((SYSPARAM(1) = BARPOS) AND 【上沿】) AND (CLOSE < 【上沿】)) AND (CLOSE > 【中線】)),【中線】,'支撐'),SHIFT3,colorFF00;
藍:【下沿】,LINETHICK0,colorFF9900;
棕:【上沿】,LINETHICK0,color99FF;
白:【中線】,LINETHICK0,colorFFFFFF;
S:CLOSE,LINETHICK0;
此處無法通過 出現:行27語法錯誤
請問???
短線:=SUM((VAR11 * VAR12),13) / SUM(VAR12,13)),colorFF00FF;
__________________
shujenwen
|
2006-02-05 08:21
