10日MTM由負值轉為正值畫ㄍ笑臉
10日MTM由正值轉為負值畫ㄍ哭臉
MTM:CLOSE-REF(CLOSE,10),LINETHICK0;
DrawIcon(MTM>0 AND REF(MTM,1)<0,L/1.03,1);
DrawIcon(MTM<0 AND REF(MTM,1)>0,H*1.03,2);

OR


MTM:=CLOSE-REF(CLOSE,10),LINETHICK0;
DrawIcon(Cross(MTM,0),Low/1.03,1);
DrawIcon(Cross(0,MTM),HIGH*1.03,2);
===================================================
還能多加上AR公式ㄉ條件ㄇ??
AR:SUM(HIGH-OPEN,N)/SUM(OPEN-LOW,N)*100;
加上AR同時大於100以上才出現笑臉
加上AR同時小於100以下才出現哭臉
這樣出現出手錯誤ㄉ平率就能降低ㄌ,希望各位大大能在指導一下囉!!

合在一起就好嚕

N:=10;
AR:SUM(HIGH-OPEN,N)/SUM(OPEN-LOW,N)*100,LINETHICK0;
MTM:CLOSE-REF(CLOSE,10),LINETHICK0;
DrawIcon(MTM>0 AND REF(MTM,1)<0 AND AR>100,L/1.03,1);
DrawIcon(MTM<0 AND REF(MTM,1)>0 AND AR<100,H*1.03,2);
Kline(O,H,L,C,0);

__________________
偶而是不是也感覺有些老
像個大人般的戀愛
有時心情糟
請你相信我在你身邊別忘了

引用:

---

最初由 alpha 發表
合在一起就好嚕

N:=26;
AR:SUM(HIGH-OPEN,N)/SUM(OPEN-LOW,N)*100,LINETHICK0;
MTM:CLOSE-REF(CLOSE,10),LINETHICK0;
DrawIcon(MTM>0 AND REF(MTM,1)<0 AND AR>100,L/1.03,1);
DrawIcon(MTM<0 AND REF(MTM,1)>0 AND AR<100,H*1.03,2);
Kline(O,H,L,C,0);

---

xcc:=DYNAINFO2(14,'2330')*100;
xc1:=DYNAINFO2(14,'2498')*100;
EXPLAINEX(1,'台積電: ',xcc,2,1);
EXPLAINEX(1,'台積%: ',xc1,2,1);
EXPLAIN(1,'台積電: '+numtostr(xcc,2)+'%');