奇狐社區論壇

奇狐社區論壇 : Powered by vBulletin version 2.3.0

奇狐社區論壇 > 指標公式 > 問題交流 > [問題]

上一主題下一主題

作者

主題

Markchu7
資深會員

註冊日期: Nov 2007
來　　自:
文章數量: 1496

[問題]

RSV:=(CLOSE-LLV(LOW,9))/(HHV(HIGH,9)-LLV(LOW,9))*100,COLORYELLOW;
K:=SMA(RSV,6,1),LINETHICK1,COLORMAGENTA;
D:=SMA(K,3,1),LINETHICK1,COLORGREEN;
CKk1:=CROSS(K,D) and refx(ALL(K>D,3),3);
CKk2:=CROSS(D,K) and refx(ALL(D>K,3),3);
CKK:=CKk1-CKk2;
CKK:=ref(CKK,barslast(CKK<>0));
UP:=CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=1,0.1),LINETHICK,COLORYELLOW;
DN:=CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=-1,0.1),COLORYELLOW;
DRAWICON(UP,L,4),PXDN5,SHIFT2;
PLAYSOUND(UP,0,'C:\chiefox\Effwav\eff04.wav');
DRAWICON(DN,H,5),PXUP25,SHIFT2;
PLAYSOUND(DN,0,'C:\chiefox\Effwav\eff04.wav');
請教版主:因為規則中用了REFX函數所以在畫箭頭時會過了2根K棒才出現箭頭,而我可用SHIFT偏移,但是聲音的部份就無法秀出來了(我是在這兩天用訓練基地中的訓練模式去跑的,實際盤中還沒跑過),請問有沒有方法可以讓聲音也可以秀出來?感謝!

向版主報告此篇 |

2010-06-28 00:14

cgjj
總版主

註冊日期: Oct 2003
來　　自:
文章數量: 18094

回覆: [問題]

引用:
最初由 Markchu7 發表
RSV:=(CLOSE-LLV(LOW,9))/(HHV(HIGH,9)-LLV(LOW,9))*100,COLORYELLOW;
K:=SMA(RSV,6,1),LINETHICK1,COLORMAGENTA;
D:=SMA(K,3,1),LINETHICK1,COLORGREEN;
CKk1:=CROSS(K,D) and refx(ALL(K>D,3),3);
CKk2:=CROSS(D,K) and refx(ALL(D>K,3),3);
CKK:=CKk1-CKk2;
CKK:=ref(CKK,barslast(CKK<>0));
UP:=CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=1,0.1),LINETHICK,COLORYELLOW;
DN:=CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=-1,0.1),COLORYELLOW;
DRAWICON(UP,L,4),PXDN5,SHIFT2;
PLAYSOUND(UP,0,'C:\chiefox\Effwav\eff04.wav');
DRAWICON(DN,H,5),PXUP25,SHIFT2;
PLAYSOUND(DN,0,'C:\chiefox\Effwav\eff04.wav');
請教版主:因為規則中用了REFX函數所以在畫箭頭時會過了2根K棒才出現箭頭,而我可用SHIFT偏移,但是聲音的部份就無法秀出來了(我是在這兩天用訓練基地中的訓練模式去跑的,實際盤中還沒跑過),請問有沒有方法可以讓聲音也可以秀出來?感謝!

這四行
DRAWICON(UP,L,4),PXDN5,SHIFT2;
PLAYSOUND(UP,0,'C:\chiefox\Effwav\eff04.wav');
DRAWICON(DN,H,5),PXUP25,SHIFT2;
PLAYSOUND(DN,0,'C:\chiefox\Effwav\eff04.wav');
改為以下六行
UP:=ref(UP,2);
DN:=ref(DN,2);
DRAWICON(UP,L,4),PXDN5;
PLAYSOUND(UP,0,'C:\chiefox\Effwav\eff04.wav');
DRAWICON(DN,H,5),PXUP25;
PLAYSOUND(DN,0,'C:\chiefox\Effwav\eff04.wav');

向版主報告此篇 |

2010-06-28 09:38