 |
aok669
初級會員
註冊日期: Nov 2012
來 自:
文章數量: 20 |
|
[求救]請問影片中參數如何調整？
程式一:
V1:=DMA((((HIGH + LOW) + (CLOSE * 2)) / 4),1.5);
HY1:=REF(EMA(V1,5),5);
實時線:MA(CLOSE,1),Color006400;
神秘線:HY1,Color400080;
stickline(C>HY1,low,high,1,0),colorred;
stickline(C>HY1,close,open,4.5,0),colorred;
stickline(C>HY1,close,open,4,0),colorred;
stickline(C>HY1,close,open,3,0),colorred;
stickline(C>HY1,close,open,2,0),colorred;
stickline(C<=HY1,close,open,4.5,0),ColorFF4242;
stickline(C<=HY1,close,open,4,0),ColorFF4242;
stickline(C<=HY1,close,open,3,0),ColorFF4242;
stickline(C<=HY1,close,open,2,0),ColorFF4242;
stickline(C<=HY1,low,high,1,0),ColorFF4242;
APP:=(VOL / (((HIGH - LOW) * 2) - ABS((CLOSE - OPEN))));
ZL:=IF((CLOSE > OPEN),(APP * (HIGH - LOW)),IF((CLOSE < OPEN),(APP * ((HIGH - OPEN) + (CLOSE - LOW))),(VOL / 2)));
SF:=IF((CLOSE > OPEN),(0 - (APP * ((HIGH - CLOSE) + (OPEN - LOW)))),IF((CLOSE < OPEN),(0 - (APP * (HIGH - LOW))),(0 - (VOL / 2))));
庫存能量:=MA((ZL + SF),2);
庫存平均:=MA((ZL + SF),5);
程式二:
V1:=DMA((((HIGH + LOW) + (CLOSE * 2)) / 4),0.9);
HY1:=REF(EMA(V1,3),1);
黃色漲:stickline((CLOSE > HY1),HY1,ref(hy1,3),6,0),LINETHICK1,color00FFFF;
綠色跌:stickline((CLOSE <= HY1),HY1,ref(hy1,3),6,0),LINETHICK1,colorgreen;
DRAWtext(CROSS(CLOSE,HY1),LOW*0.97,'↑'),LINETHICK6,colorred;
DRAWtext(CROSS(HY1,CLOSE),HIGH*1.07,'↓'),LINETHICK6,colorwhite;
線性:=((((((CLOSE * 5) + (REF(CLOSE,1) * 4)) + (REF(CLOSE,2) * 3)) + (REF(CLOSE,3) * 2)) + (REF(CLOSE,4) * 1)) / ((((5 + 4) + 3) + 2) + 1));
導航:線性,colorFF00FF;
其實一與二都是一樣的,重點是那條EMA會控制顏色
譬如:程式一:K棒大於那條均線就是紅色,反之藍色
程式二:
K棒大於那條均線就是黃色,反之綠色
請問參數如何調的跟影片中的導航線一模一樣?
也許平滑度問題該如何調？
感激不盡
|
| 最後由 aok669 在 2013-07-13 05:25 編輯 |
向版主報告此篇 |  |
|
2013-07-13 05:20 |
|
|
| |
|
cgjj
總版主
註冊日期: Oct 2003
來 自:
文章數量: 18167 |
|
回覆: [求救]請問影片中參數如何調整？
引用:
最初由 aok669 發表
程式一:
V1:=DMA((((HIGH + LOW) + (CLOSE * 2)) / 4),1.5);
HY1:=REF(EMA(V1,5),5);
實時線:MA(CLOSE,1),Color006400;
神秘線:HY1,Color400080;
stickline(C>HY1,low,high,1,0),colorred;
stickline(C>HY1,close,open,4.5,0),colorred;
stickline(C>HY1,close,open,4,0),colorred;
stickline(C>HY1,close,open,3,0),colorred;
stickline(C>HY1,close,open,2,0),colorred;
stickline(C<=HY1,close,open,4.5,0),ColorFF4242;
stickline(C<=HY1,close,open,4,0),ColorFF4242;
stickline(C<=HY1,close,open,3,0),ColorFF4242;
stickline(C<=HY1,close,open,2,0),ColorFF4242;
stickline(C<=HY1,low,high,1,0),ColorFF4242;
APP:=(VOL / (((HIGH - LOW) * 2) - ABS((CLOSE - OPEN))));
ZL:=IF((CLOSE > OPEN),(APP * (HIGH - LOW)),IF((CLOSE < OPEN),(APP * ((HIGH - OPEN) + (CLOSE - LOW))),(VOL / 2)));
SF:=IF((CLOSE > OPEN),(0 - (APP * ((HIGH - CLOSE) + (OPEN - LOW)))),IF((CLOSE < OPEN),(0 - (APP * (HIGH - LOW))),(0 - (VOL / 2))));
庫存能量:=MA((ZL + SF),2);
庫存平均:=MA((ZL + SF),5);
程式二:
V1:=DMA((((HIGH + LOW) + (CLOSE * 2)) / 4),0.9);
HY1:=REF(EMA(V1,3),1);
黃色漲:stickline((CLOSE > HY1),HY1,ref(hy1,3),6,0),LINETHICK1,color00FFFF;
綠色跌:stickline((CLOSE <= HY1),HY1,ref(hy1,3),6,0),LINETHICK1,colorgreen;
DRAWtext(CROSS(CLOSE,HY1),LOW*0.97,'↑'),LINETHICK6,colorred;
DRAWtext(CROSS(HY1,CLOSE),HIGH*1.07,'↓'),LINETHICK6,colorwhite;
線性:=((((((CLOSE * 5) + (REF(CLOSE,1) * 4)) + (REF(CLOSE,2) * 3)) + (REF(CLOSE,3) * 2)) + (REF(CLOSE,4) * 1)) / ((((5 + 4) + 3) + 2) + 1));
導航:線性,colorFF00FF;
其實一與二都是一樣的,重點是那條EMA會控制顏色
譬如:程式一:K棒大於那條均線就是紅色,反之藍色
程式二:
K棒大於那條均線就是黃色,反之綠色
請問參數如何調的跟影片中的導航線一模一樣?
也許平滑度問題該如何調？
感激不盡
您應該去請教影片中該指標公式之原始作者
基於尊重對方, 我們拒絕服務此問題
|
|
向版主報告此篇 | |
|
|
2013-07-15 09:39 |
|
|
| |
本站所有內容未經作者授權禁止轉貼節錄, 發表言論僅供參考勿作為投資決策依據。瀏覽本站請使用 IE 5.5 以上版本, 最佳瀏覽解析度 1024 x 768 全彩。
|
Powered by: vBulletin Version 2.3.0 - Copyright©2000-, Jelsoft Enterprises Limited.
簡愛洋行 製作 Copyright 2003-. All Rights Reserved. 聯絡我們
|
附件: 
