奇狐社區論壇 (http://www.chiefox.com.tw/bbs/index.php)
- 問題交流 (http://www.chiefox.com.tw/bbs/forumdisplay.php?forumid=28)
-- [問題] (http://www.chiefox.com.tw/bbs/showthread.php?threadid=13854)

[問題]

RSV:=(CLOSE-LLV(LOW,9))/(HHV(HIGH,9)-LLV(LOW,9))*100,COLORYELLOW;
K:=SMA(RSV,6,1),LINETHICK1,COLORMAGENTA;
D:=SMA(K,3,1),LINETHICK1,COLORGREEN;
CKk1:=CROSS(K,D) and refx(ALL(K>D,3),3);
CKk2:=CROSS(D,K) and refx(ALL(D>K,3),3);
CKK:=CKk1-CKk2;
CKK:=ref(CKK,barslast(CKK<>0));
UP:=CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=1,0.1),LINETHICK,COLORYELLOW;
DN:=CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=-1,0.1),COLORYELLOW;
DRAWICON(UP,L,4),PXDN5,SHIFT2;
PLAYSOUND(UP,0,'C:\chiefox\Effwav\eff04.wav');
DRAWICON(DN,H,5),PXUP25,SHIFT2;
PLAYSOUND(DN,0,'C:\chiefox\Effwav\eff04.wav');
請教版主:因為規則中用了REFX函數所以在畫箭頭時會過了2根K棒才出現箭頭,而我可用SHIFT偏移,但是聲音的部份就無法秀出來了(我是在這兩天用訓練基地中的訓練模式去跑的,實際盤中還沒跑過),請問有沒有方法可以讓聲音也可以秀出來?感謝!

回覆: [問題]

引用:

---

最初由 Markchu7 發表
RSV:=(CLOSE-LLV(LOW,9))/(HHV(HIGH,9)-LLV(LOW,9))*100,COLORYELLOW;
K:=SMA(RSV,6,1),LINETHICK1,COLORMAGENTA;
D:=SMA(K,3,1),LINETHICK1,COLORGREEN;
CKk1:=CROSS(K,D) and refx(ALL(K>D,3),3);
CKk2:=CROSS(D,K) and refx(ALL(D>K,3),3);
CKK:=CKk1-CKk2;
CKK:=ref(CKK,barslast(CKK<>0));
UP:=CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=1,0.1),LINETHICK,COLORYELLOW;
DN:=CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=-1,0.1),COLORYELLOW;
DRAWICON(UP,L,4),PXDN5,SHIFT2;
PLAYSOUND(UP,0,'C:\chiefox\Effwav\eff04.wav');
DRAWICON(DN,H,5),PXUP25,SHIFT2;
PLAYSOUND(DN,0,'C:\chiefox\Effwav\eff04.wav');
請教版主:因為規則中用了REFX函數所以在畫箭頭時會過了2根K棒才出現箭頭,而我可用SHIFT偏移,但是聲音的部份就無法秀出來了(我是在這兩天用訓練基地中的訓練模式去跑的,實際盤中還沒跑過),請問有沒有方法可以讓聲音也可以秀出來?感謝!

---

感謝總版主指導!