奇狐社區論壇 (http://www.chiefox.com.tw/bbs/index.php)
- 問題交流 (http://www.chiefox.com.tw/bbs/forumdisplay.php?forumid=28)
-- 請問版主，如何將k棒開始畫線往右不要往左，謝謝!! (http://www.chiefox.com.tw/bbs/showthread.php?threadid=19506)

請問版主，如何將k棒開始畫線往右不要往左，謝謝!!

請問版主，如何將k棒開始畫線往右不要往左，謝謝!!
Var19:=REF(VarD OR VarE OR VarF OR Var10 OR Var11 OR Var12 OR Var13 OR Var14 OR Var15 OR Var16 OR Var17 OR Var18,1) AND Var1;
多:STICKLINE(Var19,REF(CLOSE,1),REF(CLOSE,1),27,1),color00ffff,LINETHICK2;
Var1A:=REF(Var1 OR Var2 OR Var3 OR Var4 OR Var5 OR Var6 OR Var7 OR Var8 OR Var9 OR VarA OR VarB OR VarC,1) AND VarD;
空:STICKLINE(Var1A,REF(CLOSE,1),REF(CLOSE,1),27,1),colorcc0000,LINETHICK3;

回覆: 請問版主，如何將k棒開始畫線往右不要往左，謝謝!!

引用:

---

最初由 h9191888 發表
請問版主，如何將k棒開始畫線往右不要往左，謝謝!!
Var19:=REF(VarD OR VarE OR VarF OR Var10 OR Var11 OR Var12 OR Var13 OR Var14 OR Var15 OR Var16 OR Var17 OR Var18,1) AND Var1;
多:STICKLINE(Var19,REF(CLOSE,1),REF(CLOSE,1),27,1),color00ffff,LINETHICK2;
Var1A:=REF(Var1 OR Var2 OR Var3 OR Var4 OR Var5 OR Var6 OR Var7 OR Var8 OR Var9 OR VarA OR VarB OR VarC,1) AND VarD;
空:STICKLINE(Var1A,REF(CLOSE,1),REF(CLOSE,1),27,1),colorcc0000,LINETHICK3;

---

謝謝版主回復!!

請版主幫忙!!當畫線出現時,只往右邊走,謝謝!!

var1:=CLOSE>REF(CLOSE,1) AND CLOSE>REF(CLOSE,2);
Var2:=REF(Var1,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
Var3:=REF(Var2,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
Var4:=REF(Var3,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
Var5:=REF(Var4,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
Var6:=REF(Var5,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
Var7:=REF(Var6,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
Var8:=REF(Var7,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
Var9:=REF(Var8,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
VarA:=REF(Var9,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
VarB:=REF(VarA,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
VarC:=REF(VarB,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
VarD:=CLOSE<REF(CLOSE,1) AND CLOSE<REF(CLOSE,2);
VarE:=REF(VarD,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
VarF:=REF(VarE,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
Var10:=REF(VarF,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
Var11:=REF(Var10,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
Var12:=REF(Var11,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
Var13:=REF(Var12,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
Var14:=REF(Var13,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
Var15:=REF(Var14,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
Var16:=REF(Var15,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
Var17:=REF(Var16,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
Var18:=REF(Var17,1) AND CLOSE>=REF(CLOSE,1) AND CLOSE<=REF(CLOSE,2);
Var19:=REF(VarD OR VarE OR VarF OR Var10 OR Var11 OR Var12 OR Var13 OR Var14 OR Var15 OR Var16 OR Var17 OR Var18,1) AND Var1;
多:STICKLINE(Var19,REF(CLOSE,1),REF(CLOSE,1),17,1),color00ffff,LINETHICK2;
Var1A:=REF(Var1 OR Var2 OR Var3 OR Var4 OR Var5 OR Var6 OR Var7 OR Var8 OR Var9 OR VarA OR VarB OR VarC,1) AND VarD;
空:STICKLINE(Var1A,REF(CLOSE,1),REF(CLOSE,1),17,1),colore80000,LINETHICK3;

回覆: 謝謝版主回復!!

引用:

---

最初由 h9191888 發表
請版主幫忙!!當畫線出現時,只往右邊走,謝謝!!

var1:=CLOSE>REF(CLOSE,1) AND CLOSE>REF(CLOSE,2);
Var2:=REF(Var1,1) AND CLOSE<=REF(CLOSE,1) AND CLOSE>=REF(CLOSE,2);
................略 ..........................
多:STICKLINE(Var19,REF(CLOSE,1),REF(CLOSE,1),17,1),color00ffff,LINETHICK2;
Var1A:=REF(Var1 OR Var2 OR Var3 OR Var4 OR Var5 OR Var6 OR Var7 OR Var8 OR Var9 OR VarA OR VarB OR VarC,1) AND VarD;
空:STICKLINE(Var1A,REF(CLOSE,1),REF(CLOSE,1),17,1),colore80000,LINETHICK3;

---

謝謝版主回復!!

謝謝版主回復!!