奇狐社區論壇 (http://www.chiefox.com.tw/bbs/index.php)
- 問題交流 (http://www.chiefox.com.tw/bbs/forumdisplay.php?forumid=28)
-- 比上一階梯線高不顯示 (http://www.chiefox.com.tw/bbs/showthread.php?threadid=19464)

比上一階梯線高不顯示

DESP:=BARSLAST(DATE<>REF(DATE,1));
FirstCK:=BARPOS=DATACOUNT-DESP[DATACOUNT]-4374;
FirstSP:=BARSLAST(FirstCK);
BKFT:=MOD(FirstSP,18)=0;
BKFTSP:=BARSLAST(BKFT);
BKLT:=MOD(FirstSP,18)=18-1 or ISLASTBAR;
BKH:=HHV(HIGH,BKFTSP+1);
BKL:=LLV(LOW,BKFTSP+1);
BKH:=SETVAL(BKLT,BKH,-BKFTSP,BKH);
BKL:=SETVAL(BKLT,BKL,-BKFTSP,BKL);
//VERTLINE(BKLT) LINEDOT;
BK3SP:=SUMBARS(BKLT,3);
MAH3:=SUM(BKH*BKLT,BK3SP)/3;
MAL3:=SUM(BKL*BKLT,BK3SP)/3;
MMH3:=MAH3+(MAH3-BKH)/3;
MML3:=MAL3-(BKL-MAL3)/3;
MHt:IF(BKH>MMH3,MAH3,MMH3) colorred linethick0;
MLt:IF(BKL<MML3,MAL3,MML3) colorgreen linethick0;
LBMH:=LBOUND(MHt);
IF LBMH>0 then begin
SetNewLB:=LBMH-BKFTSP[LBMH];
x:=SETLBOUND(MHt,SetNewLB); x:=SETLBOUND(MLt,SetNewLB);
end;
MHt:=SETVAL(BKLT,MHt,-BKFTSP,MHt);
MLt:=SETVAL(BKLT,MLt,-BKFTSP,MLt);
SS:=(C>=MHt)-(C<=MLt);
SS:=ref(SS,barslast(SS<>0));
PARTLINE(SS=1,MLt),color888888;
PARTLINE(SS=-1,MHt),color888888;

增加條件:MHt比上一階高不顯示.只顯MLt但當時MLt比上一階低也不顯示.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
當MLt比上一階低時不顯示.只顯示MHt
但當時MHt)比上一階高也不顯示.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
如MHt比上皆低當時MLt又比上皆高上下
MHt與MLt都顯示

回覆: 比上一階梯線高不顯示

引用:

---

最初由 santienchang 發表
DESP:=BARSLAST(DATE<>REF(DATE,1));
FirstCK:=BARPOS=DATACOUNT-DESP[DATACOUNT]-4374;
FirstSP:=BARSLAST(FirstCK);
BKFT:=MOD(FirstSP,18)=0;
BKFTSP:=BARSLAST(BKFT);
BKLT:=MOD(FirstSP,18)=18-1 or ISLASTBAR;
BKH:=HHV(HIGH,BKFTSP+1);
BKL:=LLV(LOW,BKFTSP+1);
BKH:=SETVAL(BKLT,BKH,-BKFTSP,BKH);
BKL:=SETVAL(BKLT,BKL,-BKFTSP,BKL);
//VERTLINE(BKLT) LINEDOT;
BK3SP:=SUMBARS(BKLT,3);
MAH3:=SUM(BKH*BKLT,BK3SP)/3;
MAL3:=SUM(BKL*BKLT,BK3SP)/3;
MMH3:=MAH3+(MAH3-BKH)/3;
MML3:=MAL3-(BKL-MAL3)/3;
MHt:IF(BKH>MMH3,MAH3,MMH3) colorred linethick0;
MLt:IF(BKL<MML3,MAL3,MML3) colorgreen linethick0;
LBMH:=LBOUND(MHt);
IF LBMH>0 then begin
SetNewLB:=LBMH-BKFTSP[LBMH];
x:=SETLBOUND(MHt,SetNewLB); x:=SETLBOUND(MLt,SetNewLB);
end;
MHt:=SETVAL(BKLT,MHt,-BKFTSP,MHt);
MLt:=SETVAL(BKLT,MLt,-BKFTSP,MLt);
SS:=(C>=MHt)-(C<=MLt);
SS:=ref(SS,barslast(SS<>0));
PARTLINE(SS=1,MLt),color888888;
PARTLINE(SS=-1,MHt),color888888;

增加條件:MHt比上一階高不顯示.只顯MLt但當時MLt比上一階低也不顯示.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
當MLt比上一階低時不顯示.只顯示MHt
但當時MHt)比上一階高也不顯示.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
如MHt比上皆低當時MLt又比上皆高上下
MHt與MLt都顯示

---

快速協助完成.奇狐比mc服務好 感謝賜福

RMLt:=ref(MLt,barslast(MLt<>ref(MLt,1))+1);
RMHt:=ref(MHt,barslast(MHt<>ref(MHt,1))+1);
PARTLINE(SS=1 and MLt>RMLt,MLt),color888888;
PARTLINE(SS=-1 and MHt<RMHt,MHt),color888888;
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PARTLINE(time>084800 and time<=10060,MHt) color888888;
PARTLINE(time>084800 and time<=10060,MLt) color888888;
如何加時間範圍顯示條件.感謝期狐團隊.

引用:

---

最初由 santienchang 發表
RMLt:=ref(MLt,barslast(MLt<>ref(MLt,1))+1);
RMHt:=ref(MHt,barslast(MHt<>ref(MHt,1))+1);
PARTLINE(SS=1 and MLt>RMLt,MLt),color888888;
PARTLINE(SS=-1 and MHt<RMHt,MHt),color888888;
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PARTLINE(time>084800 and time<=10060,MHt) color888888;
PARTLINE(time>084800 and time<=10060,MLt) color888888;
如何加時間範圍顯示條件.感謝期狐團隊.

---