奇狐社區論壇 (http://www.chiefox.com.tw/bbs/index.php)
- 問題交流 (http://www.chiefox.com.tw/bbs/forumdisplay.php?forumid=28)
-- [問題]請問要如何改? (http://www.chiefox.com.tw/bbs/showthread.php?threadid=14115)

[問題]請問要如何改?

請問要如何改?才能讓B圖像A圖一樣高低點準確到位? 感恩!
//////////// A主圖 ////////////

RSV:=(CLOSE-LLV(LOW,9))/(HHV(HIGH,9)-LLV(LOW,9))*100,COLORYELLOW;
K:=SMA(RSV,6,1),LINETHICK1,COLORMAGENTA;
D:=SMA(K,3,1),LINETHICK1,COLORGREEN;


KDUP:=CROSS(K,D);
BKDUP:=BARSLAST(KDUP)+1;
價高點:=HHV(H,BKDUP),LINETHICK,COLORRED;
價本高:=HHV(價高點,BARSLAST(KDUP)+1),LINETHICK;
價前高:=REF(價本高,BARSLAST(KDUP)+1),LINETHICK,COLORWHITE;
指標高點:=HHV(K,BKDUP),LINETHICK,COLORRED;
指標本高:=HHV(指標高點,BARSLAST(KDUP)+1),LINETHICK;
指標前高:=REF(指標本高,BARSLAST(KDUP)+1),LINETHICK,COLORRED;

KDDN:=CROSS(D,K);
BKDDN:=BARSLAST(KDDN)+1;
價低點:=LLV(L,BKDDN),LINETHICK,COLORGREEN;
價本低:=LLV(價低點,BARSLAST(KDDN)+1),LINETHICK;
價前低:=REF(價本低,BARSLAST(KDDN)+1),LINETHICK,COLORYELLOW;
指標低點:=LLV(K,BKDDN),LINETHICK,COLORGREEN;
指標本低:=LLV(指標低點,BARSLAST(KDDN)+1),LINETHICK;
指標前低:=REF(指標本低,BARSLAST(KDDN)+1),LINETHICK,COLORGREEN;

DRAWLINE(KDUP,價本低,KDDN,價本高,0),COLORWHITE;
DRAWLINE(KDDN,價本高,KDUP,價本低,0),COLORWHITE;


//////////// B圖 ////////////
RSV:=(CLOSE-LLV(LOW,9))/(HHV(HIGH,9)-LLV(LOW,9))*100,COLORYELLOW;
K:SMA(RSV,6,1),LINETHICK,COLORWHITE,PRECISION1;
D:SMA(K,3,1),LINETHICK,COLORYELLOW,PRECISION1;
CKk1:=CROSS(K,D) and refx(ALL(K>D,3),3);
CKk2:=CROSS(D,K) and refx(ALL(D>K,3),3);
CKK:=CKk1-CKk2;
CKK:=ref(CKK,barslast(CKK<>0));

KUP:=CROSS(K,REF(K,1)),LINETHICK,COLORYELLOW;
KDUP:=CROSS(K,D),LINETHICK,COLORYELLOW;
UP:=CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=1,0.1),LINETHICK,COLORYELLOW;
KDN:=CROSS(REF(K,1),K),LINETHICK,COLORYELLOW;
KDDN:=CROSS(D,K),LINETHICK,COLORYELLOW;
DN:=CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=-1,0.1),COLORYELLOW;
UPPOS:=REF(BARPOS,BARSLAST(CKK=1)),LINETHICK,COLORYELLOW;
DNPOS:=REF(BARPOS,BARSLAST(CKK=-1)),LINETHICK,COLORYELLOW;
價本高:=HHV(H,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
價前高:=REF(價本高,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
價前前高:=REF(價前高,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
指本高:=HHV(K,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
指前高:=REF(指本高,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
指前前高:=REF(指前高,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;

價本低:=LLV(L,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
價前低:=REF(價本低,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
價前前低:=REF(價前低,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
指本低:=LLV(K,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
指前低:=REF(指本低,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
指前前低:=REF(指前低,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;

DRAWLINE(CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=-1,0.1),價前低,CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=1,0.1),價前高,0),COLORWHITE;
DRAWLINE(CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=1,0.1),價前高,CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=-1,0.1),價前低,0),COLORWHITE;

B圖

回覆: [問題]請問要如何改?

引用:

---

最初由 Markchu7 發表
請問要如何改?才能讓B圖像A圖一樣高低點準確到位? 感恩!
//////////// A主圖 ////////////

RSV:=(CLOSE-LLV(LOW,9))/(HHV(HIGH,9)-LLV(LOW,9))*100,COLORYELLOW;
K:=SMA(RSV,6,1),LINETHICK1,COLORMAGENTA;
D:=SMA(K,3,1),LINETHICK1,COLORGREEN;


KDUP:=CROSS(K,D);
BKDUP:=BARSLAST(KDUP)+1;
價高點:=HHV(H,BKDUP),LINETHICK,COLORRED;
價本高:=HHV(價高點,BARSLAST(KDUP)+1),LINETHICK;
價前高:=REF(價本高,BARSLAST(KDUP)+1),LINETHICK,COLORWHITE;
指標高點:=HHV(K,BKDUP),LINETHICK,COLORRED;
指標本高:=HHV(指標高點,BARSLAST(KDUP)+1),LINETHICK;
指標前高:=REF(指標本高,BARSLAST(KDUP)+1),LINETHICK,COLORRED;

KDDN:=CROSS(D,K);
BKDDN:=BARSLAST(KDDN)+1;
價低點:=LLV(L,BKDDN),LINETHICK,COLORGREEN;
價本低:=LLV(價低點,BARSLAST(KDDN)+1),LINETHICK;
價前低:=REF(價本低,BARSLAST(KDDN)+1),LINETHICK,COLORYELLOW;
指標低點:=LLV(K,BKDDN),LINETHICK,COLORGREEN;
指標本低:=LLV(指標低點,BARSLAST(KDDN)+1),LINETHICK;
指標前低:=REF(指標本低,BARSLAST(KDDN)+1),LINETHICK,COLORGREEN;

DRAWLINE(KDUP,價本低,KDDN,價本高,0),COLORWHITE;
DRAWLINE(KDDN,價本高,KDUP,價本低,0),COLORWHITE;


//////////// B圖 ////////////
RSV:=(CLOSE-LLV(LOW,9))/(HHV(HIGH,9)-LLV(LOW,9))*100,COLORYELLOW;
K:SMA(RSV,6,1),LINETHICK,COLORWHITE,PRECISION1;
D:SMA(K,3,1),LINETHICK,COLORYELLOW,PRECISION1;
CKk1:=CROSS(K,D) and refx(ALL(K>D,3),3);
CKk2:=CROSS(D,K) and refx(ALL(D>K,3),3);
CKK:=CKk1-CKk2;
CKK:=ref(CKK,barslast(CKK<>0));

KUP:=CROSS(K,REF(K,1)),LINETHICK,COLORYELLOW;
KDUP:=CROSS(K,D),LINETHICK,COLORYELLOW;
UP:=CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=1,0.1),LINETHICK,COLORYELLOW;
KDN:=CROSS(REF(K,1),K),LINETHICK,COLORYELLOW;
KDDN:=CROSS(D,K),LINETHICK,COLORYELLOW;
DN:=CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=-1,0.1),COLORYELLOW;
UPPOS:=REF(BARPOS,BARSLAST(CKK=1)),LINETHICK,COLORYELLOW;
DNPOS:=REF(BARPOS,BARSLAST(CKK=-1)),LINETHICK,COLORYELLOW;
價本高:=HHV(H,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
價前高:=REF(價本高,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
價前前高:=REF(價前高,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
指本高:=HHV(K,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
指前高:=REF(指本高,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
指前前高:=REF(指前高,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;

價本低:=LLV(L,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
價前低:=REF(價本低,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
價前前低:=REF(價前低,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
指本低:=LLV(K,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
指前低:=REF(指本低,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;
指前前低:=REF(指前低,BARSLAST(CKK<>REF(CKK,1))+1),LINETHICK,COLORYELLOW;

DRAWLINE(CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=-1,0.1),價前低,CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=1,0.1),價前高,0),COLORWHITE;
DRAWLINE(CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=1,0.1),價前高,CROSS(BARSLAST(CKK<>REF(CKK,1))+1 AND CKK=-1,0.1),價前低,0),COLORWHITE;

---

了解!我在想想要如何訂規則!感恩!